ID-Karta IdxApi communication protocol

Supported device types and versions 
Communication line configuration
Communication station configuration
I/O tag configuration
Literature
Changes and modifications
Document revisions

Supported device types and versions


This protocol supports data reading/writing from the identification cards ID-Karta, type ID898, and ID898K.

Communication line configuration


  • Communication line category: API

Communication station configuration


  • Communication protocol: ID-Karta IdxAPI
  • Station address according to settings on a sensor (sensor displays the address in off-line status after switch on).

I/O tag configuration


I/O tags: Ci, Co, TxtI, TxtO

The address is a number in the range of 1 byte (0 to 255). The meaning of the addresses is stated in Table 1 below:

Table 1

Value typeAddressMeaningRead/Write
Ci
Ci0Pressing the key - I/O tag value is an index of the pressed key.R
Ci1Identification - numerical. I/O tag value is the number of the last card which performed the identification.R
Co
Co0Beeping - a module of the sensor makes an audible alarm. I/O tag value defines the number of beeps (max. 255). W
Co1Relay - control of relay on the module. The written value 1 up to 254 represents a time of closure x 0.5 second. 255 = permanent closure, 0 = immediate opening.W
TxtI
TxtI0Identification - text. I/O tag value is a string with the card number (in hex), which last made the identification (e.g. "40224AB8").R
TxtO
TxtO0Text on a display. It displays a text on a display. The format of string value must be "x;y;text", where x and y are the coordinates on the display (the size of display is 2 x 20 characters; the position 0;0 means upper left corner) and text is the text that will be displayed (max. 40 characters).W


Configuration and files

The modules of the sensor communicate via RS485 interface and the communication is done by the idx.exe process, which must be running. D2000 KOM requires a dynamic library idxapi.dll, which is linked to idx.exe, for proper communication. The configuration of modules that communicate with idx.exe is stored in the registry:

[HKEY_LOCAL_MACHINE\Software\IDKarta\IDX]

[HKEY_LOCAL_MACHINE\Software\IDKarta\IDX\Uzly]

[HKEY_LOCAL_MACHINE\Software\IDKarta\IDX\Uzly\NaCom]
"Adresa"=dword:00000001
"Typ"=dword:00000001
"COM"=dword:00000001

[HKEY_LOCAL_MACHINE\Software\IDKarta\IDX\Zarizeni]

[HKEY_LOCAL_MACHINE\Software\IDKarta\IDX\Zarizeni\z1]
"Adresa"=dword:00000001
"Uzel"=dword:00000001
"Typ"=dword:00000001

The parameters in "HKEY_LOCAL_MACHINE\Software\IDKarta\IDX\Uzly" define both quantity and parameters of so-called nodes, i.e. communication interfaces. A key "COM" defines the serial port number. The list of devices is in "HKEY_LOCAL_MACHINE\Software\IDKarta\IDX\Zarizeni".

The producer ID-Karta s.r.o. (www.ID-Karta.cz) provides the files idx.exe and idxapi.dll.

Literature


  • IDX, Basic communication module, Version 1.1, ID-Karta

Changes and modifications


-

Document revisions


  • Ver. 1.0 - October 26, 2001 - Creation of document

0 komentárov

Nie ste prihlásený. Akékoľvek zmeny, ktoré vykonáte, sa označia ako anonymné. Ak už máte svoj účet, pravdepodobne sa budete chcieť prihlásiť .