In D2000 System, since version V10.0.38 PostgreSQL enables to operate these databases:


  • configuration
  • log
  • archive
  • depository
  • application


The log depository databases are not supported for PostgreSQL. The new databases, except the application ones (see the section Application databases in D2000 System), are created in D2000 Management Console when creating the application or archive. This program also enables to create and manage the database services.


For the common users, the creation and management of databases on PostgreSQL is hide and the only requirement is to have this system installed. In certain situations (creating the application or archive), user must enter the password of main user.


When creating the application with name Application over PostgreSQL, the user must select the existing database service, which ensures running of database, and password to its main user with name postgres. Then, D2MC will create the databases aplikacia_syscfg and aplikacia_logfile in this database service and save them into separate tablespaces (ts_aplikacia_syscfg, ts_aplikacia_logfile), placed in subdirectories syscfg and logfile in application directory of D2000 System. It also creates DSN records Aplikacia.SysCfg and Aplikacia.LogFile for these databases. The created user dba is the owner of these databases and has the access to them.


When creating the archive for Application over PostgreSQL, the user must select the existing database service, which ensures running of database, and password to its main user with name postgres. Then, D2MC will create the database aplikacia_archiv in this database service and save them into separate tablespaces (ts_aplikacia_archiv), placed in subdirectory archiv in application directory of D2000 System. It also creates DSN record Aplikacia.Archiv for this database. The created user dba is the owner of this database and has the access to it.


Each depository, or depository segment is implemented as the separate database. The names are derived from the application name (<application>_TS_#ID#, wher #ID# is depository number, or <application>_TS_#ID#_#SEG#, where #SEG# is the number of depository segment).


Backup of D2000 System databases


As backup of PostgreSQL databases can be done in various ways, D2000 System does not contain any tool or functionality, which would ensure a backup of these databases. Backup should, therefore, be done manually according to one of the methods described in this manual: http://www.postgresql.org/docs/9.4/static/backup.html.


List of databases, which is necessary to backup this way, can be derived from the name of application as follows:


  • <application name>_syscfg
  • <application name>_logfile
  • <application name>_archiv
  • <application name>_TS_<ID>


Application databases in D2000 System



In the event that D2000 System should work with the external application database, for its integration user must create a system DSN record in ODBC Administrator on the computer with running D2000 DBManager.

Creating the PostgreSQL DSN record

Warning: Both 32 and 64 bit ODBC Administrators exist in 64-bit OS Windows. DSN record must be created in the 32/64 ODBC Administrator depending on version of D2000 DBManager (as 32-bit applications cannot use 64-bit DSN and vice versa).


In case of selecting more types of DSN records, user should select the one which contain Unicode in the name.


The configuration of DSN record for PostgreSQL should be done according to these steps:


  1. Write, correctly, these parameters in the main window:
    Creating the PostgreSQL DSN record - parameters
    Database – name of existing database.
    Server – address of server, which PostgreSQL service runs on (or localhost in case of the same computer),
    Port – port number, which PostgreSQL service listens on.

    After entering the name and password and clicking the Test, D2000 should connect to database successfully. If the connection failed, you must check the entered data and settings of PostgreSQL service, which database runs on (see the section Connection to PostgreSQL database running on dedicated machine). Warning! For security reasons, do not keep the name and password filled in the final state!

    For proper functioning with D2000 System, it is necessary to change other default parameters.
     
  2. In Datasource/Page1 tab, set the following parameters:
    Creating the PostgreSQL DSN record - settings
    CacheSize can be set at your discretion.

  3. In Datasource/Page2 tab, keep these settings:
    Creating the PostgreSQL DSN record - settings
    The  highlighted parameters must be set as follows:
    Updateable Cursors – the ability to use cursors to writes (enables updateable cursor emulation in the driver)
    bytea as LO - enables support for writing Large Objects (blobs) into bytea columns
    Server side prepare - compiled cursors (e.g. for parameterized queries) on the server side can improve performance. If possible, we recommend that you enable this option.
    Level of rollback on errors - if transaction operations are used and there may be an error during command execution (e.g. INSERT fails because of a unique index violation), then if the parameter is set to Statement, only the last command is rolled back. If the parameter is set to Transaction, the entire transaction is rolled back. On the other hand, the Statement setting makes "microcommits" (savepoints) after each operation, which both reduces performance and consumes transactional IDs, which in turn leads to increased vacuuming activity of PostgreSQL database.


This DSN record can be used for connection to external PostgreSQL database in D2000 System.


Connection to PostgreSQL database running on dedicated machine



In the event that D2000 System should connect to the remote server, it is necessary to configure DSN record in ODBC administrator on client according to the previous instructions with the only difference - into Server parameter enter the name or IP address of server, which PostgreSQL database runs on.


On dedicated machine with the running database, which you want to connect to, you must properly define the rights for connection. Default settings of PostgreSQL enables connection to the running database service only from the computer on which it is started. When necessary to connect from the network, you must change this setting by the configuration file pg_hba.conf, which is placed in the selected directory of database service.


It contains this default settings:

Example of default settings

This setting enables connection to database server only for the user from the same computer (127.0.0.1 represents the localhost).


If the user wants to connect from any computer, the configuration file must contain this line:

Example of default settings

This line enables to connect all users to all databases of running service from all addresses. However, the password is required (md5 method).


The setting, mentioned above, has the illustrative character and it is not recommended for use on the production systems because it can represent a security risk when using the weak passwords. The configuration file pg_hba.conf enables to limit the assigning the rights for connection to database (based on the user or database), which can be found for example on this link http://www.postgresql.org/docs/9.4/static/auth-pg-hba-conf.html.


Each change of this configuration file requires reloading of configuration (Reloading of configuration database service), or restarting the database service.


Specialities of PostgreSQL



Using the quotation marks for name of tables and columns


The identifiers of tables and columns in PostgreSQL, which are not in quotation marks, are not case sensitive. It means, the column can be created in this way:


create table t (id integer)


Then, these queries can be created:


select id from t


select Id from t


select ID from t


select "id" from t


All forms of querying of the given column are functional.


The identifiers of tables and columns can be written in quotation marks, too. However, within queries the identifier must have the same size of characters as when it was created, and always it must be in quotation marks.


It means, when creating this column:


create table t ("Id" integer)


it is possible to refer to it only in the same format:


select "Id" from t


Any other format of this record will not work.


In regard of complications, which can occur in case of using the identifiers with quotation marks, we do not recommend to use this format of entry. In some situations, this format is necessary, e.g. if name of column is the same as some key word in PostgreSQL.


When using the application database in D2000 System, we do not recommend to use the identifiers in quotation marks. D2000 System supports both formats of entries, but when using quotation marks, it must be used even in selection and sorting conditions. This can relate to both the using of database operations in ESL scripts (with WHERE conditions), and displaying database table in D2000 HI (if some selection or sorting condition is entered).


0 komentárov

Nie ste prihlásený. Akékoľvek zmeny, ktoré vykonáte, sa označia ako anonymné. Ak už máte svoj účet, pravdepodobne sa budete chcieť prihlásiť .