DDE Client communication protocol

Supported device types and versions
Communication line configuration
Communication station configuration
I/O tag configuration
Literature
Changes and modifications
Document revisions

Supported device types and versions


Communication supports the DDE Client access using the XlTable data format (the format used by e.g. MS Excel, Wonderware Intouch I/O Servers) or CF_TEXT data format.

Communication line configuration


Communication with the DDE Server requires a separate line. There is not possible accessing several servers from one communication line.

  • Communication line category: DDE.
  • Line parameters (the DDE - parameters tab):
  • Server - DDE server name (e.g. MS Excel „Excel“).
  • Impersonate user - if the option is checked, the communication line will connect the NetDDE with the following name and password.
  • Name - system user name.
  • Password - system user password.

Note: You can impersonate just an user with the logon rights Log on as a batch Job.

Communication station configuration


  • Communication protocol: DDE Client.
  • Station address is the DDE Topic name (string containing up to 50 characters).

Station protocol parameters

Table 1

Keyword Full name Meaning Unit Default value
REQ Request If the value is Yes, after each writing a value, there will be sent the request for backward reading the value. YES/NO NO
TYPE Server Type Type of DDE server for communication:

  • WARM - supporting  XTYP_ADVSTART transactions,
  • COLD - periodic reading the values using the XTYP_REQUEST transaction.
  • COLD/WARM WARM
    FORMAT Data Format Used data clipboard format for data transmission. XLTABLE/TEXT XLTABLE
    TIMEOUT Transaction Timeout Timeout of the function DdeClientTransaction, which determines the maximum amount of time (in miliseconds), that the DDE client will wait for a response from the DDE server in a synchronous transaction. ms 1000

    I/O tag configuration


    Possible types: Ai, Ao, Ci, Co, Di, Do, TxtI, TxtO.

    Address is the DDE Cell name (string containing up to 50 characters).

    Note: If initialization of the connection to the server, topic or cell has failed, the attempt to connect is repeated in the interval of 5 seconds. It is true when the connection is lost (server shutdown etc.).


    Connection to the server via NetDDE

    If the DDE server is installed on other PC within a local computer network, you can establish a connection via the NetDDE interface. For such a connection is valid:

    • DDE server name (line configuration) is defined in the form of \\computer_name\server, where computer_name is the network name of the PC with running DDE server (e.g. \\WRK_PC\Excel).
    • On the PC with running DDE server, there must be run the Network DDE service. You can run it as follows: Start menu -> Settings -> Control Panel -> Services, find Network DDE” and click Start. In case of the automatic start-up Startup… and switch Startup type to Automatic -> OK.
    • On the PC with a process D2000 KOM as a DDE Client, the Network DDE service is run automatically at occurrence of the first request for the NetDDE server. If you are experiencing a problem with access rights, there will be displayed the Logon dialog box for entering access name and password which are valid on the PC with the DDE server. Usually, it is necessary to use the Win NT system utility "ddeshare" on the PC with the DDE server for configuration of access right of individual users to individual DDE servers, topics and cells.

    Example of communication testing

    It is possible using the MS Excel program. Run the MS Excel as the DDE server using the switch /e e.g. from the command prompt - excel.exe /e.

    Complete access to a DDE cell is as follows:

    Excel|Sheet1!”R1C1”

    Where:

    • Excel is the server name. Configure a line of DDE category and enter the DDE server name Excel.
    • Sheet1 is a topic name. Configure the protocol station DDE Client XlTable and enter the DDE topic name Sheet1. Other tab names are similar in the form of Sheetx if they were not called differently.
    • R1C1 is the name of a DDE cell. Configure an I/O tag and enter the DDE cell name R1C1. The name means Row 1, Column 1 and the form of the other cells names is RxCy.

    The naming is valid only for English versions of MS Excel.

    Literature


    -

    Changes and modifications


    • May 20th 2002 - added TEXT data format + COLD/WARM link.

    Document revisions


    • Ver. 1.1 – February 8th 2000 – document update

    0 komentárov

    Nie ste prihlásený. Akékoľvek zmeny, ktoré vykonáte, sa označia ako anonymné. Ak už máte svoj účet, pravdepodobne sa budete chcieť prihlásiť .