Supported device types and versions
Communication line configuration
Communication station configuration
I/O tag configuration
Literature
Changes and modifications
Document revisions
Supported device types and versions
Generic User Protocol is intended to support an application-level implementation of simple and lightweight communication protocols directly in the D2000 Event process via an ESL script or Java code. It supports several types of lines including line-redundant and system-redundant ones. Data read from the communication are published into input I/O tags (IN) without waiting for any confirmation from the ESL script's side, therefore it is recommended to implement data handling via Server Event using the action ON CHANGE, eventually by a trigger event with a request queue configured, eventually by enabling multiple executions of the script (action ENABLE) so that all the published data is handled even under heavier load.
Communication line configuration
Category of communication line:
- Serial, Serial Line Redundant, Serial System&Line Redundant
- SerialOverUDP Device Redundant, SerialOverUDP Line Redundant, SerialOverUDP System&Line Redundant
- MOXA IP Serial Library
- RFC2217 Client
- TCP/IP-TCP, TCP/IP-TCP Redundant: it is possible to enter several IP addresses/symbolic names separated by commas or semicolons.
Note: if a TCP/IP-TCP or TCP/IP-TCP Redundant line has all stations set to StOFF, the TCP connection will be closed. Thus it is possible to control TCP communication from the ESL script using a STSTAT tell command. File I/O: reading from a file is supported (line by line or the entire file at once according to the File Read Mode protocol parameter.
As an "Input file" parameter, a specific file (e.g. C:\temp\input.txt) or a mask (e.g. C:\temp\*.txt) can be specified.
As an "Archive" parameter, the following can be specified:value #DELETE# - the input file is deleted after reading the data
directory name - the input file is moved to the specified directory after reading the data
empty value - the input file is not manipulated after reading the data
For both the "Input file" and "Archive" parameters, the symbolic constant #APPDIR# can be used to indicate the application directory (e.g. "#APPDIR#\input.txt").
Communication line protocol parameters
Configuration line dialog box - tab Protocol parameters.
They influence some of the optional protocol parameters. The following line parameters can be set:
Table 1
| Keyword | Full name | Description | Unit | Default value |
|---|---|---|---|---|
TS | TCP Server | Activates server mode on the TCP/IP-TCP line. In this mode, the D2000 KOM process listens to the client connection. After the client is connected, the D2000 KOM process communicates with it (i.e., it is a single-server implementation handling a single client). After the client is disconnected, the D2000 KOM process listens again. | - | False |
RT | Read Wait Timeout | Waiting between individual data readouts from the communication. If no data was received during this period and previously some data was read, it will be published as a value of input I/O tag IN. If some data was received during this period, it will be appended to a buffer, until a timeout occurs or the buffer becomes full (see a parameter Read Size). If a parameter Log Each Read is set to True, data will be published immediately regardless of the value of the parameter Read Wait Timeout. | sec.mss | 1.000 |
CE | Character encoding | The method for text encoding/decoding for writing/reading. Implemented are:
Note: ISO_8859_1 mode is suitable for the transmission of 8-bit ASCII characters and implementation of binary protocols. | - | ISO_8859_1 |
RS | Read Size | Maximum size (in bytes) of input data. Longer data will be published in several chunks. | - | 1024 |
FRM | File Read Mode | Method of reading data from a file:
| - | Read one row |
LE | Log Each Read | If this parameter is set to True, data will be published immediately regardless of the value of the parameter Read Wait Timeout. | - | False |
LF | Log Format | Format of data traces in log files: "0 - Hexa log" or "1 - Text log". Setting the correct format helps to make a communication log file more readable depending on whether the specific protocol is text-oriented or binary by dumping the data in text or hexadecimal format. | - | 0 - Hexa log |
SL | Single Log | Setting this parameter to True will make all logs to be written to a single file on redundant lines. Setting this parameter to False means that two log files will be created for the primary/secondary line (Serial Line Redundant, SerialOverUDP Line Redundant, TCP/IP-TCP Redundant), or four log files will be created for the primary/secondary line of the A/B system (Serial System&Line Redundant, SerialOverUDP System&Line Redundant). | - | False |
Communication station configuration
- Communication protocol Generic User.
- The station address is not configured; it is recommended to configure a single station per line, but multiple stations are supported too. In this case, when data is received from the communication, it will be published via input I/O tags IN on all configured stations. Likewise, it will be possible to use output I/O tags OUT on any configured station.
I/O tag configuration
Possible value types of I/O tag: TxtI, TxtO.
Input I/O tags:
- The input I/O tag has an address IN.
Note: on redundant lines an I/O tag with address IN receives values read from any line (primary/secondary), eventually from any system (A/B). - on line-redundant lines (Serial Line Redundant, SerialOverUDP Line Redundant, TCP/IP-TCP Redundant) it is possible to configure I/O tags with addresses IN_A and IN_B to distinguish inputs from primary/secondary line
- on system-redundant lines (Serial System&Line Redundant, SerialOverUDP System&Line Redundant) it is possible to configure I/O tags with addresses IN_A, IN_B, IN_C, IN_D to distinguish inputs from primary/secondary line of system A/B
Output I/O tags:
- The output I/O tag has an address OUT.
Note: on redundant lines values written to an I/O tag with address OUT are written to both lines (primary/secondary), eventually to both systems (A/B). - on line-redundant lines (Serial Line Redundant, SerialOverUDP Line Redundant, TCP/IP-TCP Redundant) it is possible to configure I/O tags with addresses OUT_A and OUT_B to write data to primary/secondary line only
- on system-redundant lines (Serial System&Line Redundant, SerialOverUDP System&Line Redundant) it is possible to configure I/O tags with addresses OUT_A, OUT_B, OUT_C, OUT_D to write data to primary/secondary line of system A/B only
Note: it is possible to configure and use an I/O tag with the address IN and I/O tags IN_A, IN_B, IN_C, IN_D on a single station at the same time.
In a similar way, it is possible to configure and use an I/O tag with the address OUT and I/O tags OUT_A, OUT_B, OUT_C, OUT_D on a single station at the same time.
Literature
Blog
You can read blogs about Generic User Protocol:
Changes and modifications
-
Document revisions
- Ver. 1.0 - October 15, 2015 - Creating the document.
- Ver. 1.1 - December 12, 2021 - Implementation of TCP Server and Character Encoding parameters.
Related pages:
Pridať komentár